Flywheel Mounting Bolt - Torque
Group: 13Number: 93-03
Date: July 31, 1993
Subject:
Flywheel Mounting Bolts, Torque Revision
Model(s):
4 Cylinder vehicles shown in chart
The procedure for tightening the bolts that secure the flywheel or driveplate to the crankshaft has been revised for those vehicles/transmissions listed above.
Tighten these bolts as follows:
60 N-m (44 ft.lb.) + a quarter additional turn (90~)
^ Always use new bolts (which are coated with locking compound)
^ The additional quarter turn can be applied in stages rather than in one motion.