Planet Carrier and Trans. Housing With Input Gear and Cover

PLANET CARRIER AND INPUT GEAR, 096 TRANSMISSION








Removing and Installing


1 - Planet carrier

2 - O-ring
- Always replace
- Insert in planet carrier

3 - Axial needle bearing washer

4 - Axial needle bearing

5 - Axial needle bearing washer
- Install smooth side in input gear

6 - Transmission housing

7 - Input gear
- Do not remove to disassemble planetary gearbox
- Removing and installing input gear or axial needle bearing for planet carrier.

8 - Planet carrier shim
- Determining thickness

9 - Washer

10 - Bolt
- Tightening torque: 30 Nm (22 ft lb)
- For small input shaft

11 - Spacer bush
- Clip qty. 7 into gasket

12 - Gasket
- Always replace

13 - Cover

14 - Bolt
- Tightening torque: 8 Nm (71 in lb)