Rules of Cleanliness

Rules of Cleanliness

CAUTION: When working on the fuel supply/ injection system, carefully observe the following rules:

1 - Thoroughly clean connection and surrounding areas before loosening connection.

2 - After removing components, place in clean area and cover with foil or paper Avoid using rags!

3 - Components which have been opened or disassembled must be carefully covered or sealed if repair cannot be carried immediately.

4 - Install clean parts only
- remove replacement parts from package just before installing
- do NOT use spare parts that were stored loose or unpackaged (e.g. in tool boxes, etc.)

5 - When fuel system is open:
- avoid using compressed air whenever possible
- avoid moving the vehicle whenever possible