California Vehicles

TEMPERATURE CHART


Coolant Temperature Sensor
Between sensor terminals Refer to TEMPERATURE CHART

Digifant Control Unit
Power supply to terminal 19 Battery Voltage
Engine speed limit 6500 +/- 50 RPM

Fuel Injector
Each injector 15 - 20 ohms

Intake Air Temperature Sensor
Between terminals 2 and 3 Refer to TEMPERATURE CHART

Idle Stabilizer Valve
Between terminals on valve 2 - 10 ohms

Knock Sensor
Between sensor terminals infinite ohms

Oxygen Sensor
Preheat Resistor Cold - less than 68°F (20°C) 3 ohms
Preheat Resistor Hot - greater than 662°F (350°C) 13 ohms
Output Voltage (with CO adjustment within specs) 0.3 - 0.7 volts

Tune-up Specifications
Air/Fuel Ratio (CO content) 0.7%
Air/Fuel Ratio-Limits [1] 0.3 - 1.2%
Timing [2] 6° +/- 1° BTDC
Timing Advance [3] 30° +/- 3° BTDC
Idle RPM [4] 800 +/- 50

[1] Check CO content with the oxygen sensor connected.
[2] AT 2300 RPM, and coolant temperature sensor disconnected.
[3] Normal operating temperature, with coolant temp. sensor connected, at 4500 RPM. Add initial timing.
[4] A/C off.