Driver's Side Headlight High Beam Alignment, Checking

- Switch headlights ON in high beam position.

- Realign Beamsetter box with the high beam headlight if necessary.





- Set Beamsetter "Scaled wheel" to 0%.

- Cover low beam lamp (use hand or small piece of cardboard) and check that the "hot spot" of high beam pattern is centered on the square target box of the pattern screen.

Note:
High beam pattern is built into the reflector design and cannot be adjusted separately

If high beam pattern is way out of adjustment:

- Inspect for reflector damage.

- Replace reflector if needed.

Note:
Always align headlight in the low beam position.