Adjustment Overview

Final drive, Adjusting 096 Transmission








Overview of Adjustments


1 - Input gear

2 - Drive pinion

3 - Differential

4 - Shim for input gear
- Determine thickness from table

5 - Shim for drive pinion
- Determine thickness from table

6 - Shim for differential

7 - Tapered roller bearings for input gear
- Always replace together
- Measure friction torque via pinion shaft. Friction torque of new tapered roller bearings must be 180-22O Ncrn (16-20 in lb) greater than friction torque of pinion shaft.

8 - Tapered roller bearings for drive pinion
- Always replace together
- Re-determine correct shim thickness when replacing tapered roller bearings

9 - Tapered roller bearings for differential
- Always replace together
- Measure friction torque via pinion shaft. Friction torque of new tapered roller bearings must be 60-80 Ncm (5- 7 in lb) greater than friction torque of pinion shaft