Radiator
COOLING SYSTEM LAYOUT
1 - 10 Nm (7 ft lb)
2 - Cover
3 - Lock carrier
4 - Air duct
5 - Bracket
6 - Engine coolant radiator
• After replacing replace all of the coolant.
7 - Rubber washer
8 - V-belt
9 - Expanding pin
10 - Guide ring
• Note installation position
• Attached to fan shroud -12- clips
11 - Auxiliary fan
12 - Fan shroud
13 - Wiring connector
14 - Radiator cooling fan
15 - Thermal switch (F18)
• 35 Nm (26 ft lb)
• For radiator fan -14-
• Switchirig temperatures:
Stage 1:
On 92 to 97 °C (197 to 206 °F)
Off 84 to 91 °C (183 to 196 °F)
Stage 2
On 99 to 105 °C (197 to 206 °F)
Off 91 to 98 °C (210 to 208 °F)
16 - Lower coolant hose
• To thermostat housing
17 - Connector
18 - O-ring
• Replace
19 - Retaining clip
• Must be seated correctly
20 - Upper coolant hose
• From thermostat housing