Vibration Dampener - Revised Torque Procedure
Group: 13Number: 93-01
Date: August 15, 1993
Subject:
Vibration Dampener, Revised Torque Procedure
Model(s):
Corrado, Passat with VR6
from m.y. 1992
Condition
Procedure for tightening the vibration dampener to the crankshaft
Production
New torque specifications.
Service
Torque the vibration dampener bolt as follows
^ 100 N-m (74 ft.lb.) + an additional 1/4-turn
Note
When removing and installing the vibration dampener, always replace the securing bolt.
Use support bracket 3273 whenever loosening or tightening the dampener.