Front Door Automatic Closing Function, Programming

Programming:

From Outside with Ignition Key in Door Lock (Programming in Parallel for All Windows):

Windows Open (Or Partially Open):
- Close windows until blocking recognition responds with window closed (approx. 1/2 sec. after window stops)
- Operate key switch in close direction two times for at least 1-1/2 seconds each time.

Windows Closed:
- Operate key switch in close direction two times for at least 1-1/2 seconds each time.

From Inside Using Window Switch (Programming Each Window Individually):

Windows Open (Option 1):
- Operate window switch until window is closed.
- Release switch.
- Operate window switch two times for at least 1/2 second each time.

Windows Open (Option 2):
- Operate window switch until window is closed.
- Operate switch to open until window is fully open.
- Operate switch to close until window is fully close.

Windows Closed:
- Operate window switch in close direction for at least 1/2 second.
- Release switch.
- Operate window switch again in close direction for at least 1/2 second.

NOTE: The system is programmed by the user during normal operation without realizing that programming is taking place.