How to Return TCM to Basic Setting

AUTOMATIC TRANSMISSION 096 - RETURNING TO BASIC SETTING

NOTE: The basic setting should be initiated after performing the following repairs:

- Replacing engine.
- Replacing Engine Control Module (ECM).
- Replacing/altering throttle valve.
- Adjusting throttle valve (setting idle speed).
- Replacing Throttle Position (TP) Sensor.
- Altering setting of Throttle Position Sensor.
- Replacing Transmission Control Module (TCM).

Resetting Procedure

- Connect Scan Tool VAG 1551 and enter address word "02", Transmission Electronics, and advance until "Select function XX" appears in the display.

^ Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons 0 and 4. (To select function 04 "Basic setting").

NOTE: Accelerator Pedal must remain in the Closed Throttle Position.

^ Indicated on display:

Rapid data transfer Q
04 Basic setting

- Press Q button to confirm entry.

^ Indicated on display:

Rapid data transfer HELP
Input display group number XX

- Press buttons 0 twice (to input display group 00).

- Press Q button to confirm entry.

^ Indicated on display:

System in basic setting -->

The system is now in the basic setting.

- Depress Accelerator Pedal (AP) as far as kickdown and hold in this position for 3 seconds.

- Press --> button.

^ Indicated on display:

Rapid data transfer HELP
Select function XX