M/T - Changes and Modifications
Group: 34Number: 92-07
Date: December 31, 1992
Subject:
5-Speed Transmission 02C, Changes, Modifications
Model(s):
Passat Syncro All M.Y.
As of Aug. 1992, the support bracket for shifter and selector cables is changed. As of Oct. 1991, a compensator weight is installed on the transmission shift lever.
New:
Three bolts with additional mounting grommets, compensator weight installed on transmission shift lever.
Old:
Support bracket with two mounting points.
Support bracket for shift and selector cables, changed
1 - Support bracket
2 - Bolts
^ length new 32 mm old 20 mm
- 25 N-m (18 ft.lb.)
3 - Grommet
4 - Spacer
Note:
The new support bracket can be installed as of transmission manufacturing date 03 09 1.
Compensator weight, added
1 - Compensator weight
^ remove when adjusting shift mechanism.
^ provides for smoother shift movement.
^ only install with shift cable (item 4) in cars up to Oct. 91.
2 - Mounting nut for compensator weight
- 25 N-m (18 ft.lb.)
3 - Bolt with threaded stud
^ 25 N-m (18 ft.lb.)
4 - Shift cable, reinforced
^ install when using compensator weight .
^ to adjust orcheck gearshift mechanism See Repair Manual Group 34.
Clutch release lever, locking
New:
with locking bolt or bolt M8x35 (can also be used for previous transmissions)
Old:
with locking bolt or bolt M8x22
Note:
The hole for locking bolt is also the 3rd mounting for the support bracket for shift and selector cables.