Remove/Install

REVERSE GEAR CLUTCH -K2- TO LARGE SUN GEAR 096 TRANSMISSION






Note: Disassembling planetary gearbox Planetary Gearbox Disassembly/Assembly

1 - Reverse gear clutch -K2-
- Disassembling and assembling Disassemble/Assemble

2 - Shim
- Determining thickness, Clutch play between -K7- and -K2-
- 1 or 2 shims can be installed

3 - 1st to 3rd gear clutch -K1- with turbine shaft
- With ball valve (arrow), disassembling and assembling
- Without ball valve (for transmissions from 01-93), disassembling and assembling

4 - Axial needle bearing washer

5 - Axial needle bearing

6 - Axial needle bearing washer
- Lugs face toward axial needle bearing

7 - 3rd and 4th gear clutch -K3- with pump shaft
- With ball valve (arrow), disassembling and assembling
- 4th gear clutch -K3- without ball valve (for transmissions from 01-93), disassembling and assembling.

8 - Axial needle bearing with washer
- Axial needle bearing faces toward small drive shaft

9 - Small drive shaft
- Modified -K3- clutch from 01-93

10 - Needle bearing

11 - Axial needle bearing

12 - Large drive shaft
- Modified -K1- clutch from 1-93

13 - Axial needle bearing

14 - Axial needle bearing washer
- With shoulder

15 - Large sun gear
- Transmissions up to 12-92: 27 teeth
- Transmissions from 1-93: 24 teeth

16 - Axial needle bearing
- Transmissions up to 12-92: Outer diameter 41 mm (1.61 in).
- Transmissions from 1-93: Outer diameter 39.1 mm (1.54 in).

17-Axial needle bearing washer

18 - Small sun gear
- Cannot be removed from planet carrier in transmission from 1-93