Rear Door: Service and Repair
Rear Door ServicingUse this article to help determine the proper procedure(s) for the repair(s) that you are performing. For specific repairs, go to the specific component for repair information, if available.
1. Door
Adjust at hinge within oversized holes
2. Window channel connector
Fastened in center connector
3. Window channel
Fastened into window frame
4. Door window
5. Vent window
6. Phillips-head screw
3.5 Nm (31 in lb)
7. Center connector
8. Hex-head screw
6 Nm (53 in lb)
9. Window slot seal
Pushed onto flange
10. Window regulator
11. Hex-head screws
Only loosened for removal of window regulator
10 Nm (7 ft lb)
12. Cover
13. Hex-head bolt
25 Nm (18 ft lb)
14. Side impact member
15. Door check strap sleeve
16. Door check strap
17. Hex-head screw
7.5 Nm (66 in lb)
18. Console
19. Bolt
9 Nm (80 in lb)
20. Door hinge
Bolted to door and B-pillar
21. Torx bolt T45
36 Nm (27 ft lb)
22. Screw
23 Nm (17 ft lb)