Mirrors, Outside - Troubleshooting Wind Noise
Group: 66Number: 94-02
Date: Aug 22, 1994
Subject:
Outside Rear View Mirror, Troubleshooting Wind-Noise
Model(s):
Golf III & Jetta III
To reduce wind noise at both outside rear view mirrors install a foam strip following the procedure below.
^ Remove mirror trim to obtain access to the mounting screws. Loosen the door trim panel to gain access to the lower right screw.
^ Remove mirror.
Caution:
Avoid contact with painted door surface.
Mirror:
Install a commercially available self-adhesive foam strip on the inside of the mirror (see figure 1). Approximate size of foam strip in inches: height .39, depth .55, length 4.33. Be sure to install the foam Strip as shown in figure 1.
^ Reinstall mirror.
^ Perform this procedure for both outside rear view mirrors.
Labor Operation: 66 79 32 0
Time Units: 40