Hydraulic Control Assembly - Antilock Brakes

ABS, ABS/EDL Hydraulic Unit, Vacuum Brake Booster And Brake Master Cylinder (Teves 04)

CAUTION: DO NOT separate the ABS hydraulic pump from the valve block.

NOTES: The illustration is an exploded view of the ABS/EDL unit. Servicing for ABS alone is identical.

1 Brake pedal position sensor -G1OO-
2 Spacer cap
3 0-ring
- Always replace
4 Circlip
- Always replace
5 Brake line
- Brake master cylinder (primary piston circuit) to ABS hydraulic unit -N55-
6 Vacuum brake booster
7 Bracket
8 Seal
9 Pin
10 Brake fluid reservoir
11 Cap
12 Clip
13 Screw
14 EDL series resistance -N159-
15 Self-locking nut
- 25 Nm (18 ft lb)
16 Brake master cylinder
17 Shield
18 Bolt
19 ABS hydraulic unit -N55-
20 ABS/EDL hydraulic unit -N55-
21 Brake line connection
- To right-front brake caliper
22 Torx� bolts
- T25
23 Brake line connection
- To left-rear brake caliper
24 Brake line connection
- To right-rear brake caliper
25 Brake line connection
- To left-front brake caliper
26 Brake line
- Brake master cylinder (secondary piston circuit) to ABS hydraulic unit -N55-