Engine and Transmission, Aligning

Engine And Transmission, Aligning
Alignment is only necessary when the engine and transmission have been removed, and in addition, the subframe and engine mounts have been loosened.

Special Tools, Testers And Auxiliary Items
VAG 1331Torque wrench, 5 to 50 Nm range (4 to 37 ft lb)
VAG 1332 Torque wrench, 40 to 200 Nm range (30 to 150 ft lb)

Aligning





- Loosen engine mount central bolt -A-

- Loosen transmission mount -B- (on transmission and sub-frame)





- Loosen front engine mount on the engine carrier and console

- Align assembly stress-free by rocking the power train

- Tighten bolts again in the same sequence

Tightening Torques

Front Engine Mount:

Right Rear Engine Mount:

Left Rear Engine Mount: