Up to 08.93

A/C Compressor Mounting Bracket, Removing/Installing (6 Cyl. Gasoline Engine, Up To August 1993)







Note: The compressor bracket and related components can be removed and installed without discharging the refrigerant system.

1 - Compressor and generator bracket
- Removing:
- Remove compressor and generator.
- Installing:
- Install "fitting bolts" -3- and -11- first.
- Replacing:
- In case of repairs also remove bracket for power steering pump
- As replacement part, install bracket for generator, compressor and power steering pump
2 - Washer 8.4 x 16 x 1.6 mmm
3 - Fitting bolt M8 x 28
- torque: 25 Nm (18 ft lb)
4 - Allen bolt M8 x 30
- Torque: 25 Nm (18 ft lb)
5 - Allen bolt M8 x 38
- Torque: 25 Nm (18 ft lb)
6 - Allen bolt M8 x 30
- Torque: 25 Nm (18 ft lb)
7 - Refrigerant hoses
8 - Compressor
- Removing:
- Remove front bumper
- Loosen lock carrier and pull forward.
- Remove headlight assembly
- Remove ribbed belt -9-
- Remove generator
- Loosen bolts -10- a few turns and drive back threaded sleeve with a soft hammer. Then remove bolts.
9 - Ribbed belt
10 - Bolt M10 x 112
- Torque: 45 Nm (33 ft lb)
11 - Fitting bolt M8 x 20
- Torque: 25 Nm (18 ft lb)
12 - Washer 8.4 x 16 x 1.6 mm