Cancelling the Memories/Setting the Time

Cancelling the memories

Both memories can be cancelled separately with the ignition on. To cancel memories, slide memory switch (E 109) fully left (for memory 1) or fully right (for memory 2) into position 0 and hold longer than 1 second.

If the battery is disconnected, then both memories are cancelled automatically.

Setting the time

To set the time there are two buttons on the left below the engine coolant temperature (ECT) gauge. The upper button (h) is for the hours and the lower one (min) for the minutes. Pressing the appropriate button briefly will advance the time one hour or one minute. With button depressed, hours or minutes will advance continuously.

With the minute button the time can be set exactly to the second as follows:

- Press minute button until time displayed is one minute before time to be set.
- Press minute button at the moment when the second hand of an accurate watch shows a full minute or when the time signal is heard on the radio.