Fuel Filter: Service and Repair

Fuel Filter, Servicing





1 - Return line
- From injection pump
2 - Supply line
- To injection pump
3 - O-Ring
- Replace
4 - Control valve
- Installation position: arrow points towards fuel tank
- When changing filter, remove securing clip and take control valve off complete with fuel lines
- Below +15° C:
Passage to filter open
- Over +31° C:
Passage to filter closed
5 - Securing clip
6 - Return line
- To fuel tank
7 - Supply line
- From fuel tank
8 - Fuel filter
- Flow direction is indicated by an arrow
- Do not interchange connections
9 - Gasket
- Replace if damaged
10 - Water drain plug
- To bleed; remove securing clip and take control valve off complete with fuel lines attached
- Loosen and allow approx. 100 cc's fluid to drain