Camshaft, Engine

DIMENSIONS
Camshaft Axial Clearance:
Maximum 0.15 mm (0.0059 inch)
Camshaft Radial Clearance:
Wear limit 0.11 mm (0.0043 inch)
Camshaft Run Out:
Maximum 0.01 mm (0.0004 inch)
Valve Timing:
Intake:
Opens after Top Dead Center (TDC) 6°
Closes after Bottom Dead Center (BDC) 20°
Exhaust:
Opens before BDC 25.5°
Closes after TDC 6.5°

TIGHTENING SPECIFICATIONS
Bearing Cap Nut 20 Nm (15 ft. lbs.)
Cam Sprocket Bolt 45 Nm (33 ft. lbs.)