Repairing

Generator (GEN) with Poly-ribbed Belt

Generator (GEN) Carbon Brushes:

Length of new carbon brushes = 12 mm (0.47 in.)
Wear limit = 5 mm + 1 mm (0.2 in. + 0.0394 in.)

Generator (GEN) Poly-ribbed Belt Pulley, Replacing:

The special tool -socket 3310- is required to loosen/tighten the ribbed belt pulley on Generator (GEN).

The ribbed belt pulley securing nut tightening torque is 65 Nm ± 5 Nm (48 ft lb ± 4 ft lb)