Disassemble/Assemble

FREE WHEEL WITH -B1- PISTON, 096 TRANSMISSION







Disassembling and Assembling

1 - Rollers
- Installing - Fig. 1

2 - Springs
- Installing - Fig. 1

3 - Cage
- Installing - Fig. 2
- Securing - Fig. 3

4 - Outer ring

5 - Piston
- Sealing lips are vulcanized to piston
- Moisten sealing lips with ATF before installing
- Turn piston slightly while installing
- Installed position - Fig. 4

Fig. 1:

Fig. 1 Installing rollers and springs
- Install springs so that spring (-arrow-) enqages in cage

Fig. 2:

Fig. 2 Installing cage with springs and rollers
- Install with large lugs (-arrow-) facing up

Fig. 3:

Fig. 3 Securing cage
- Secure cage by turning in direction of arrow as far as stop.

Fig. 4:

Fig. 4 Installed position of piston
- Install piston -A- as shown.