Front Bumper: Service and Repair

Remove Bumper







1 - Cover
- Material - PP/EPDM
- Removing and installing cover.

2 - Rivet
- Connects cover to wheel housing

3 - Buffer/crossmember
4 - Crossmember
5 - Bolt
- 4.5 Nm (Qty. 3)

6 - Sealing washer (plastic)
7 - Guide piece
- To remove and install, pull out/slide in bumper parallel out of guide pieces (left and right sides)

8 - Side marking
- Only USA

9 - Spoiler
- Clipped in cover
- Does not need to be removed when removing cover

10 - Bolt
- 4.5 Nm (Qty. 5)

11 - Cover piece
- Required only for painted covers