Electric/Hydraulic Convertible Top

Assembly Overview







1 - Convertible Top Operation Switch E137
- located in center console

2 - Convertible Top Control Module J256
- Installed beneath rear seat bench

3 - Main bearing for convertible top frame
- Qty. 2

4 - Hydraulic cylinder
- Qty. 2

5 - Fill level indicator
- Hydraulic oil must stand between min- and max marking with convertible top open.
- Oil for convertible top hydraulics G 002 000 available in 1000 ml containers.

6 - Oil filler plug
- 5 Nm

7 - Toggle bolt
- By threading on toggle bolt, hydraulic system becomes without pressure and convertible top can be operated by hand.

8 - Hydraulic hoses
9 - Hydraulic pump
- In vehicles up to Vehicle Identification Number (VIN) 1E -T- 018000, there are slight changes in type of construction.

10 - Right Contact Switch (Cover Installed) F156 or Left Contact Switch (Cover Installed) F155
- Qty. 2
- Only in older vehicles
- Contact switches at top on rear side trim together with rod magnets on cover prevent closing of convertible top when top cover is installed.