Backrest Upper Section, Removing and Installing

Backrest Upper Section, Removing And Installing

Removing
- Remove backrest lower section.
- Fold up seatbench.







- Remove bolt - 1 - (40 Nm) at left and right and remove seat belt anchor - 2 -.
- Pry out rear panel trim - 1 - from backrest upper section flange and remove toward rear.

NOTE: Upper area of rear bulkhead trim is bonded to backrest upper part. When installing use universal adhesive D 001 200.







- Remove bolts - 2 -, pull seatbelts out of backrest upper section and remove backrest upper section.







Installing
- Installation is reverse order of removal.