Ignition System

Ignition System Components:

1 - Ignition wire
^ Check for continuity

2 - Interference suppression connector
^ Resistance: 600 - 1400 Ohms.

3 - Terminal 1
4 - Terminal 15
5 - Ignition Coil Power Output Stage (N157)
6 - 10 Nm (7 ft lb)
7 - Ignition Coil (N152)
8 - Connector
^ 3-pin

9 - Ground (GND) strap
10 - Knock Sensor 1 (G61)
11 - 20 Nm (15 ft lb)
^ Incorrect tightening torque affects
function of knock sensor

12 - Spark Plug connector
^ Resistance: 4000 - 6000 Ohms
^ Remove and install with VW 3277

13 - Spark Plug
^ Tightening torque: 30 Nm (22 ft lb)
^ Remove and install with 3122 B

14 - 25 Nm (18 ft lb)
15 - Clamp
16 - O-ring
^ Always replace

17 - Ignition Distributor with Camshaft
Position (CMP) Sensor (G40)

18 - Dust cap
19 - Rotor for Ignition Distributor
^ Identification: R1
^ Resistance: 600 - 1400 Ohms.

20 - Distributor cap
^ Check for cracks, traces of current leaks
^ Check for wear on contacts
^ Clean before installing
^ Check carbon brushes for wear and freedom
of movement

21 - Interference suppression cap