Transmission and Drivetrain: Technical Service Bulletins
- Recalls
- Customer Interest
- Counterweight - Vibration
- A/T - Erratic, Harsh or Delayed Upshifts, No DTCs Set
- Drum Brakes - Wheel Bearing and Axle Servicing
- Rear Tires - Abnormal Wear
- M/T - Strainer Added to Prevent Ring and Pinion Damage
- Engine - Intermittent No Start, Various DTC's Set in TCM
- M/T - Humming Noise During Cornering
- A/T - Erratic Shifting, No DTCs Stored in TCM
- A/T - ATF Seeping From Final Drive Breather
- M/T - Hard to Shift Into Reverse/Can't Select Reverse
- By Symptom
- Abnormal/Uneven wear
- Customer Interest
- Counterweight - Vibration
- A/T - Erratic, Harsh or Delayed Upshifts, No DTCs Set
- Drum Brakes - Wheel Bearing and Axle Servicing
- Rear Tires - Abnormal Wear
- M/T - Strainer Added to Prevent Ring and Pinion Damage
- Engine - Intermittent No Start, Various DTC's Set in TCM
- M/T - Humming Noise During Cornering
- A/T - Erratic Shifting, No DTCs Stored in TCM
- A/T - ATF Seeping From Final Drive Breather
- M/T - Hard to Shift Into Reverse/Can't Select Reverse
- Erratic Shifting
- Hard Shifting
- Hard shifting/Stiff clutch
- Leaks
- No shift/Incorrect gear engagement
- Noise
- Recalls
- Slipping
- Starting problems
- All Technical Service Bulletins
- Warranty - 10 Year/100,000 Mile Powertrain Eligibility
- Fluids and Lubricants - Warranty Reimbursements
- Counterweight - Vibration
- A/T - Erratic, Harsh or Delayed Upshifts, No DTCs Set
- Drum Brakes - Wheel Bearing and Axle Servicing
- Engine - Attach Pressure Plate or Flywheel to Crankshaft
- Rear Tires - Abnormal Wear
- M/T - Strainer Added to Prevent Ring and Pinion Damage
- ECM/TCM - Component Replacement Identification
- Engine - Intermittent No Start, Various DTC's Set in TCM
- A/T - Checking Solenoid Values While Driving
- A/T - K1 and K3 Clutches, Pressing During Installation
- A/T - Troubleshooting
- A/T - ATF Changing and Checking
- A/T Selector Elements - Updated Information
- A/T - Diagnosis and Repair Using Test Kit and Worksheet
- Warranty - A/T Diagnosing and Repairing
- Campaign - Install Resistor Wire
- Warranty - Transmission Manufacture Date, Code Letters
- A/T - Engine Vacuum Testing
- A/T - How To Use A Pressure Gauge
- A/T - Drive Axle and Wheel Lug Nut Torque Specifications
- A/T - Slipping or No-Shift/Metal Sealing Rings
- A/T - Front Bushing Wear
- A/T - Math Formulas Part I
- A/T - Twenty Steps To Successful Repairs
- A/T - Math Part II
- A/T - Choosing the Right ATF
- M/T - Humming Noise During Cornering
- M/T - Shift Linkage Adjusting Procedure
- A/T - Erratic Shifting, No DTCs Stored in TCM
- A/T - ATF Seeping From Final Drive Breather
- M/T Case - Sealing Precautions
- ATF Temperature Sensor - Resistance Measurements
- A/T - Phase II and Phase II ETA Transmission Differences
- M/T - Hard to Shift Into Reverse/Can't Select Reverse