Preparing Window Flange For Glazing

Preparing Window Flange For Glazing







- Cut back remaining material using scraper (25 mm) V.A.G 1561/8, do not remove all residue under any circumstance.

NOTE: Residual material acts as a base for new adhesive sealing material. Keep adhesive surface free of dirt and grease.

CAUTION: Do not prime, activate or use a cleaning solution on adhesive surface. Keep adhesive surface free of dirt and grease.

Exception: If bonding is not performed immediately after cutting back residual bead, it must be activated.

NOTE: If body flange is being worked on or is partially replaced, it must be cleaned and primed again after painting corresponding area.