Removal and Installation

1. Airbag Unit
2. Bracket
3. Connector
4. Opening cover with retaining frame
5. Hex bolt (Torque to 10 Nm [7 ft lb].)

Airbag Unit Removing:
- Disconnect battery ground strap.
- Open Cover -4-.
- Remove Hex Bolt.
- Disconnect connector -3- and remove airbag unit.

Installing:
- Install airbag unit in reverse order.
- Switch ignition on.

WARNING: Ensure that no person(s) remain in vehicle during following steps.

- Connect battery ground strap.