Diesel Injection Pump

1. 55 Nm (41 ft lb)
2. Injection pump sprocket
3. Woodruff key
- Ensure it is securely seated
4. Oil seal
- Replace
5. Banjo bolt
- 25 Nm (18 ft lb)
6. Supply hose
- From fuel filter
7. Injection pump
- With Quantity Adjuster N146
- With Modulating Piston Displacement sensor G149
- With Fuel Temperature sensor
8. O-Ring
- Replace if damaged
9. Fuel cut-off valve
- 40 Nm (30 ft lb)
10. Union
- For return line
11. 25 Nm (18 ft lb)
12. Return hose
- To control valve/fuel filter
13. Injector lines
- 25 Nm (18 ft lb)
- Remove with 3035 tubing wrench
- Always remove injector lines as an assembly
- Do not bend or alter shape
14. Fuel injector
- For 3rd cylinder with Needle Lift sensor
15. 20 Nm (15 ft lb)
16. Dished washer
17. Retainer
18. Mounting
19. 3 pin harness connector
- For fuel cut-off and cold start injector
20. Union
- With pressure valve
- 45 Nm (33 ft lb)
21. Timing control cover
- If leaking, replace O-ring
22. Heat shield
- Replace
23. 10 Nm (7 ft lb)
24. Cold Start injector N108
25. Strainer
26. Retainer
27. Sleeve
- Tapered
28. 25 Nm (18 ft lb)
- Nut with taper
29. Console