Erasing DTC Memory (Function 05)

NOTE: Erasing DTC memory (function 05) is only possible after checking DTC memory (function 02). If DTC memory cannot be erased, check DTC memory again and rectify indicated malfunctions.

Prerequisites
- Check DTC memory.
- All malfunctions repaired.

After checking DTC memory:

Readout in display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5- to select function 05, "Erase DTC memory':

Readout in display:

Rapid data transfer Q
05 Erase DTC memory

- Press -Q- button to confirm input.

Indicated on display: (DTC Memory is erased)

Rapid data transfer ->
DTC Memory is erased!

- Press -> button.

Indicated on display (select function):

Rapid data transfer HELP
Select function XX

- End output (function 06).

NOTE: If this (below) appears in the display the test sequence is faulty.

Warning!
Fault memory was not interrogated

- If this (below) appears in the display, the test sequence is faulty.

Rapid data transfer ->
Fault memory was not interrogated

Adhere exactly to test sequence: First check DTC memory repair malfunctions if necessary then erase.