Checking Toothed Belt For Camshaft

Check condition of toothed belt
- Open fasteners of upper toothed belt cover and remove cover.
- Check condition of toothed belt for:
- Cracks, cross-sectional breaks
- Separation (cover layer, belt cords)
- Wear-through on cover layer
- Fraying of cord strands
- Surface cracks (plastic shroud)
- Traces of oil and grease


Note: It is essential to replace toothed belt if malfunctions are found. This will avoid possible break-downs or operating problems. Replacing the belt is a repair procedure.





While checking the condition, take notice of the following defects:
A - Tears (cover side)
B - Lateral movement
C - Fraying
D - Tears (in teeth)

See also "Timing Belt Replacement, Important Note". Service Intervals