Computers and Control Systems: Locations

1 Clutch Vacuum Vent valve Switch F36
- In footwell
2 Brake Pedal Switch F47
- In footwell
3 Brake Light Switch (F)
- In footwell





2 Throttle Position sensor G79
- In footwell on accelerator





1 Mass Air Flow sensor G70
2 EGR Vacuum Regulator solenoid valve N18
3 Heater line
4 Engine Control Module (ECM) J248
- contains Manifold Absolute Pressure sensor G71
- contains Barometric Pressure sensor F96
5 Injector with Needle Lift sensor G80
6 Engine Coolant Temperature sensor G62
7 Coolant Glow Plug Relay J325
8 Wastegate Bypass Regulator valve N75
9 Intake Air Temperature sensor G72
10 Central connector
11 2-pin harness connector for Needle Lift sensor G80
12 3-pin harness connector for Engine Speed sensor G28
13 Engine Speed sensor G28
14 7-pin harness connector
- for Fuel Temperature sensor G81
- for Quantity Adjuster N146
- for Modulating Piston Displacement sensor G149
15 3-pin harness connector
- for Fuel Cut-off valve N109
- for Cold Start Injector N108
16 Fuel Cut-off valve N109
17 Quantity Adjuster
- with Fuel Temperature sensor G81
- with Quantity Adjuster N146
- with Modulating Piston Displacement sensor G149
18 Metering Pump V54 for Additional fuel metering device