Installation

THROTTLE POSITION SENSOR, INSTALLING AND ADJUSTING

Special Tools, Testers And Auxiliary Items
- VAG 1551/1552 Scan Tool with VAG 1551/3 adaptor cable
- Box Wrench (e.g. Hazet 4561)

Installing

NOTE: The illustration shows the Throttle Position sensor removed from the vehicle and viewed from above.

- Attach Throttle Position sensor G79 to mounting bracket





- Attach cable cam to Throttle Position sensor so dimensions shown are maintained when facing forwards
a 22 mm (0.87 in.)
b 41 mm (1.61 in.)
c Forwards

NOTE: The cable cam eye must be parallel to forward direction.

- Install Throttle Position sensor with mounting bracket
- Install Accelerator Pedal and fit cable cam eye to pin on Accelerator Pedal