With Disc Brakes (Rear)

NOTE: Adjustment of the parking brake for disc brakes is only necessary after replacing the parking brake cables, brake calipers, or brake pads and discs.





1. Remove hand grip and center console to allow access to adjusting nuts (arrows).
2. Release parking brake.

Parking Brake Adjustment:

3. Tighten adjusting nuts until levers (arrow) lift off of stops on caliper.
4. Max. gap between lever and stop 1.5 mm (0.059 inch)
5. Pull up on parking brake and then release.
6. Check that both wheels turn freely.