Wheel Bearing

1 Self-Locking Nut
- Tighten to: 265 Nm (195 ft. lbs.)
- Only loosen and tighten with the vehicle standing on its wheels (danger of accident)
- Any paint residue and/or corrosion on the thread of the outer joint must be removed before the nut is installed

2 Washer

3 Brake Disc
- Allocation, refer to Brakes and Traction Control.

4 Brake Caliper
- Do not loosen brake hose when working on front suspension
- Hang up with wire or similar

5 Hub

6 Speed Sensor Rotor
- Only on vehicles with ABS

7 Hex Bolt
- Tighten to: 10 Nm (82 inch lbs.)

8 Splash Plate

9 Circlip
- Ensure correctly seated

10 Wheel Bearing
- Replace, as it is destroyed during pressing out

11 Self-Locking Hex Nut
- Tighten to: 35 Nm (26 ft. lbs.)

12 Wheel Bearing Housing

13 Self-Locking Hex Nut
- Tighten to: 50 Nm (37 ft. lbs.)

14 Hex Bolt
- Clamping bolt for ball joint

15 Self-Locking Bolt/Washer Assembly
- Tighten to: 125 Nm (92 ft. lbs.)
- For securing brake carrier

16 Socket Head Multi-Point Bolt
- Tighten to: 45 Nm (33 ft. lbs.)

17 Drive Shaft
- Repairing, refer to Servicing

18 Circlip
- Ensure correctly seated

19 Self-Locking Hex Nut
- Tighten to: 95 Nm (70 ft. lbs.)

20 Hex Bolt
- Shank diameter 11 mm
- Adjusting camber, refer to Steering and Suspension
- Mark position before loosening

21 Self-Locking Hex Nut
- Tighten to: 60 Nm (44 ft. lbs.)

22 Stop

23 Suspension Strut Bearing

24 Suspension Strut
- Disassembling and assembling, refer to Steering and Suspension

25 Bracket

26 Hex Bolt

27 Tie Rod
- Removing and installing, refer to Steering and Suspension

28 Countersunk Screw

29 Screw