Cooling System Components, Body Side

Cooling System Components, Body Side





1 - Mounting

2 - 10 Nm (7 ft lb)

3 - Radiator
^ Removing and installing - refer to Service and Repair of Radiator
^ After replacing, always replace coolant

4 - Coolant hose, upper
^ To connector pipe - refer to Cooling System Components, Engine Side.

5 - Coolant hose, lower
^ To coolant pump - refer to Cooling System Components, Engine Side.

6 - V-belt
^ For auxiliary fan -9-
^ Only with optional equipment

7 - Guide ring
^ Note installation position
^ Attached to fan shroud -1O- with clips

8 - Coolant fan -V7-
^ Removing and installing - refer to Radiator and Coolant Fan, Removing and Installing.

9 - Auxiliary fan
^ Only with optional equipment
^ Removing and installing - refer to Radiator and Coolant Fan, Removing and Installing.

10 - Fan shroud
^ Note installation position

11 - Connector

12 - Cover

13 - Expansion tank

14 - To coolant pipe or connector flange
^ - refer to Cooling System Components, Engine Side, item 14.

15 - To ATF cooler
^ For vehicles with automatic transmission

16 - To cylinder head
^ - refer to Cooling System Components, Engine Side, item 8.

17 - To upper coolant hose
^ - refer to Cooling System Components, Engine Side, item 2.

18 - Cap
^ Check with VAG 1274 and 1274/4
^ Test pressure: 1.3-1.5 bar (19-22 psi)

19 - Coolant Fan Control (FC) thermal switch -F18-
^ Tightening torque: 35 Nm (26 ft lb)
^ For electric coolant fan -8-
Switching temperatures:
^ 1st stage:
ON: 92°-97°C (198°-207°F)
OFF: 84°-91°C (183°-196°F)
^ 2nd stage:
ON: 99°-105°C (210°-221°F)
OFF: 91°-98°C (196°-208°F)

20 - Rubber bushing