Engine Lubrication: Description and Operation
Lubrication System, General InformationCAUTION!
^ If large amounts of metal shavings or small metal particles are found in the engine oil, caused by wear of crankshaft and connecting rod bearings, thoroughly clean the oil passages to remove contaminants and help prevent later damage.
^ The oil cooler cannot be sufficiently cleaned, and must be replaced.
^ The oil level must NOT exceed the MAX mark on the dipstick. If this level is exceeded (too much oil) the catalytic converter may be damaged.
Checking oil pressure - refer to Oil Pressure And Oil Pressure Switches, Checking.
Oil system capacity:
^ Without oil filter 3.5 liters (3.7 qt.)
^ With oil filter 4.0 liters (4.2 qt.)
Also see Owners Manual
Engine oil specifications:
Use engine oil to VW standard 500 00 or 501 01. Only in exceptional cases: Multi-grade oils corresponding to API-SF or SG.