Push Button, Removing and Installing

Push Button, Removing And Installing







1 - Circlip
2 - Actuator lever
3 - Linkage clip
4 - Guide piece
5 - Seal
6 - Hinged clip
7 - Push button housing
8 - Compression spring
9 - Guide cylinder
10 - Push button
11 - Seal
12 - Lock cylinder
- Removing:
- Remove circlip, remove actuator lever and remove lock cylinder (key must be inserted in lock cylinder).
- Maintaining common key locking.
- Common key locking can be maintained by repositioning locking plates

13 - Seal
14 - Contact switch
15 - Clip