Vehicle Damage Warnings

Battery handling instructions

CAUTION! Before working on the electrical system:

- Obtain radio anti-theft code.
- Ignition OFF!
- Disconnect battery Ground (GND) strap.


Notes:

- Battery terminal clamps must only be fitted by hand without force in order to prevent damage to the battery housing.

- Battery terminals must no longer be greased.





- Tightening torque for all battery terminal clamps: 5 Nm (44 in. lb).

- After reconnecting battery:

- Activate vehicle vehicle equipment such as radio, clock and power windows.
- On vehicles equipped with OBD II, activate readiness code.
-------------------------------------------------------------


Warnings and safety measures for handling lead-acid batteries





1 - Read and follow all instructions regarding the battery that are contained in this Repair Manual and in the Owner's Manual.

2 - Danger from acid burns:
- When working with electrolyte always wear eye protection and rubber gloves.
- Never tip a battery on edge. Electrolyte can spill from the ventilation openings.

3 - Keep open flames and sparks away and DO NOT smoke near batteries!
- Avoid sparks when working with cables and electrical units.
- Avoid short circuits.

4 - Wear eye protection.

5 - Keep children away from acid and batteries.

6 - Disposal:
- Waste batteries must only be disposed of in appropriate waste disposal sites. Refer to local regulations pertaining to battery disposal.

7 - Never dispose of old batteries in household waste!

8 - Danger of explosion:
- A highly explosive gas is produced when charging batteries.