Rear Door: Service and Repair

Use this article to help determine the proper procedure(s) for the repair(s) that you are performing. For specific repairs, go to the specific component for repair information, if available.





1- Door
- Adjust at hinge within oversized holes
2- Window channel connector
- Fastened in center connector
3- Window channel
- Fastened into window frame
4- Door window
5- Vent window
6- Phillips-head screw
- 3.5 Nm (31 in lb)
7- Center connector
8- Hex-head screw
- 6 Nm (53 in lb)
9- Window slot seal
- Pushed onto flange
10- Window regulator
11- Hex-head screws
- Only loosened for removal of window regulator
- 10 Nm (7 ft lb)
12- Cover
13- Hex-head bolt
- 25 Nm (18 ft lb)
14- Side impact member
- (Revised, See Revision below.)
15- Door check strap sleeve
16- Door check strap
17- Hex-head screw
- 7.5 Nm (66 in lb)
18- Console
19- Bolt
- 9 Nm (80 in lb)
20- Door hinge
- Bolted to door and B-pillar
21- Torx bolt T45
- 36 Nm (27 ft lb)
22- Screw
- 23 Nm (17 ft lb)

Revision - Side Impact Member:

1- Cover
2- Hex-head bolt
25 Nm (18 ft lb)
3- Side-impact member