Radiator

Legend
1 Mounting
2 Bolt
- Tighten to: 10 Nm (7 ft. lbs.).
3 Radiator
- After replacing radiator, replace coolant.
4 V-belt
- Only with optional equipment.
5 Guide Ring
- Note installed position.
- Attached to fan shroud with clips.
6 Coolant Fan
7 Coolant Hose, Upper To Connector Pipe
8 Coolant Hose, Lower To Coolant Pump
9 Auxiliary Fan
- Only installed on models with optional equipment.
10 Fan Shroud
- Note installed position.
11 Connector
12 Cover
13 Expansion Tank
14 To Coolant Pipe Or Connector Flange
- On models with manual transmission, connects to item No. 13 of coolant pipe diagram, refer to Radiator Hose.
- On models with automatic transmission, connects to item No. 9 of coolant pipe diagram, refer to Radiator Hose.
15 To ATF Cooler
- On models with automatic transmission.
16 To Cylinder Head
17 Cap
- Pressure test with tester tool No. VAG 1274 and adapter VAG 1274/4.
- Pressure specifications: 1.3-1.5 bar (19-22 psi).
18 Coolant Fan Control Thermal Switch
- Tighten to: 35 Nm (26 ft. lbs.).
- Switching temperatures:
1st stage:
ON: 92-97°C (197-206°F)
OFF: 84-91°C (183-195°F)
2nd stage:
ON: 99-105°C (210-221°F)
OFF: 91-98°C (195-208°F)
19 Rubber Bushing