Amplified Roof-Mounted Antenna

1- Antenna whip
2- Antenna base
- Antenna amplifier located in antenna base
- To remove and install, first lower rear part of molded headliner
3- Antenna cable
- Routed from roof antenna to lower left A-pillar
4- Antenna cable
- Routed from lower left A-pillar to radio
5- M14 nut with serrated washer
- Torque: 7 Nm (62 in lb)
- Serrated washer is attached to nut with plastic ring
- Apply dielectric grease to inside of roof in area of serrated washer
6- Seal