Initial Inspection and Diagnostic Overview

On vehicles which have experienced an air bag system deployment, certain system components must be replaced. To ensure proper system operation on any vehicle involved in a collision, perform procedures outlined under "Testing and Inspection". All system components should be inspected for dents, cracks, exposure to excessive heat and other damage. All air bag system wiring should be inspected for chafing and interference with other vehicle components.

The instrument should also be inspected. The system should be disarmed as described under "Air Bag System Disarming & Arming" when repairing the vehicle. Do not expose components or wiring to heat guns, welding or spray guns when performing service procedures.