Assembly Overview

Rear door, servicing






1. Door
Adjust at hinge within oversized holes

2. Window channel connector
Fastened in center connector

. Window channel
Fastened into window frame

4. Door window
Adjusting Adjustments

5. Vent window

6. Phillips-head screw
3.5 Nm (31 in lb)

7. Center connector

8. Hex-head screw
6 Nm 153 in lb)

9. Window slot seal
Pushed onto flange

10. Window regulator

11. Hex-head screws
Only loosened for removal of window regulator
10 Nm (7 ft lb)

12. Cover

13. Hex-head bolt
25 Nm (18 ft lb)

14. Side impact member
Revised m.y. 1997. See figure below

15. Door check strap sleeve
16. Door check strap

17. Hex-head screw
7.5 Nm 166 in lb)

18. Console

19. Bolt
9 Nm (80 in lb)

20 - Door hinge
Bolted to door and B-pillar

21 - Torx bolt T45
36 Nm (27 ft lb)

22 - Screw
23 Nm (17 ft lb)


Revised side-impact member, m.y. 1997






1. Cover

2. Hex-head bolt
25 Nm (18 ft lb)

3. Side-impact member