Radio (Sound System), Removing and Installing

Radio (Sound System), removing and installing

Removing

Caution Before working on the electrical system:
- Obtain the radio anti-theft code.
- Ignition off!
- Disconnect battery Ground (GND) strap.

Special tools and equipment





3316 radio removal tool






- Slide radio release tool 3316 into release slots (arrows) until they engage.






- Pull radio out of instrument panel using grip rings on release tool.
- Disengage harness connectors from radio and detach.

NOTES: The radio release tool 3316 must not be pushed to the side or tilted during this procedure. To remove the release tool from radio, press in locking lugs on side of radio.

Installing

- Attach harness connectors to radio.
- Slide radio evenly into instrument panel until it engages properly in assembly frame.

Notes: Do not pinch or damage wires when installing radio.

After reconnecting battery:
- Activate vehicle vehicle equipment such as radio, clock and power windows as per Repair Manual and/or Owner's Manual.
- Activate readiness code