Drivers Side Trim, Removing and Installing

Drivers Side Trim, Removing And Installing

Removing







- Pry off cover caps - 1 - and remove bolts - 2 -.
- Remove switch mount - 3 - from bracket.







- Loosen left side instrument panel cover - 1 - from instrument panel at rear and pull out.
- Remove bolts - 2 -.







- Turn rotating handle - 1 - of light switch to position "0".
- Push in rotating handle - arrow A - and turn toward the right - arrow B -.
- Pull switch out of instrument panel - arrow C - and disconnect harness connectors.
- Unclip switch - 2 - for headlight range control and disconnect connector.







- Remove bolt (under a cover cap) from glove compartment - 1 - - arrow -.







- Unscrew four bolts - 1 -.
- Unclip upper trim on drivers side - 2 - and remove from instrument panel.

Installing
- Installation is performed in the reverse order of removal.