Sunroof With Glass Panel, Assembly Overview

Sunroof With Glass Panel, Assembly Overview







1 - Glass panel for sunroof (one-piece safety glass)
2 - Panel seal
- Adjusting panel seal
- Seal joint at center in rear area
- Panel seal, replacing

3 - Sun protection
4 - Countersunk screws (microencapsulated)
- Always use new countersunk screws
- 3.5 Nm

5 - Slider
6 - Upper trim
7 - Lower trim
8 - Rain channel
- Removed together with link guide.

9 - Guide hook
10 - End piece
- Use butyl adhesive sealing cord AKL 450 005 05 for sealing

11 - Installation unit
- Removing and installing installation unit
- If necessary use special grease G 000 450 02 exclusively to grease guide channels, otherwise the functions cannot be guaranteed.

12 - Bolt
- 3x

13 - Electrical drive motor
- Adjusting drive motor (zero position)

14 - Wind deflector
15 - Spring
16 - Torx bolt
- 25-Pin Connector T25
- 4.5 Nm

17 - Rear guide
- Removed together with link guide.

18 - Link guide
19 - Gap bracket
- Removed together with link guide.