Rear Wheel Housing Liner

NOTE: Wheel house liners differ slightly depending on equipment, with regard to position and number of mounting elements.





1 - Wheel house liner
- Remove wheel. Wheel bolt tightening torque = 120 Nm (89 ft lb).
- Remove only right screw and wheel house liner.
- Remove Phillip screws (Qty. 7) and remove wheel house liner.

2 - Hex nut
- 70 Nm (52 ft lb)

3 - Bolt

4 - Spreader nut

5 - Cover
- Right side only

6 - Speed nut

7 - Speed nut
- On bumper cover or fender