With Manufacturer Scan Tool

Erase DTC Memory (Function 05)


NOTE: The VAG 1552 Mobile Scan Tool (ST) can be used instead of the VAG 1551 Scan Tool (ST), however a print-out is not possible.


Requirements

- All malfunctions repaired
- Functional check completed
- DTC memory checked again

Work sequence

- Connect VAG 1551 scan tool. Refer to "Selectable Functions When Using VAG 1551", under "Restraint Systems", Scan Tool Connecting and Initial Checks
- Initiate Rear spoiler On Board Diagnostic (OBD). Initial Inspection and Diagnostic Overview

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display


Rapid data transfer Q
05 - Erase DTC Memory


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer ->
DTC Memory is erased !


DTC memory is now erased.

- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTE:
- This message indicates an error in the test sequence.


Attention! ->
DTC Memory was not interrogated


- Adhere exactly to test sequence; first check DTC memory, and if necessary, repair malfunctions, then erase DTC memory.

- End output (function 06).